Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Hardbody Forum (D21) (http://www.infamousnissan.com/forum/forumdisplay.php?f=21)
-   -   fender liner/splash liner material? (http://www.infamousnissan.com/forum/showthread.php?t=45383)

street_rulerr 04-19-2021 04:13 PM

fender liner/splash liner material?
 
Im going to cut a fresh fender liner, the one that you remove for oil changes and always destroy.



any idea what material to make this out of? i was thinking some kinda synthetic leather or vynol? i want something that wont shrink up and pull all the clips out on with weather changes. also dont want something that will absorb water and cause rot/mildew.

ahardb0dy 04-19-2021 04:47 PM

When I had my 87 with the 3" body lift I made liners out of rubber Semi truck mud flaps.


I used 1/4" bolts installed from the engine side of the inner fender, long enough to put a nut on the bolt to hold it in place. Than I installed the rubber liner, and used a washer with another nut.


This way, when you had to remove the liner the bolts stayed in place. You could also instead of using the second nut, drill a small hole through the end of the bolt and use a quick release pin.


Worked good on my 87 and the rubber was much thicker than the OEM liner. Semi mud flaps are pretty easy to find also.

street_rulerr 04-19-2021 09:22 PM

thats a little more than i wanna do.

Tropicalcats 04-19-2021 09:49 PM

Quote:

Originally Posted by street_rulerr (Post 548139)
thats a little more than i wanna do.

Easy

https://www.carparts.com/details/Nis...B&gclsrc=aw.ds

street_rulerr 04-19-2021 10:57 PM

yah but thats not the part. im looking for the apron/soft sided thing

LugNut1990 04-19-2021 11:11 PM

OP: Take a look at black EPDM sheet-roofing. Not cheap, but may be very close to the original material.

robson1015 04-19-2021 11:29 PM

lowes has carpet runner diamond plate plastic that works fine.

oxfoot 04-20-2021 03:41 AM

My recommendation would be pick-n-pull or an auto salvage yard of the like. Just wander around a few until you find a dece pair. I see them all over the place here in UT in nice condition.

street_rulerr 05-14-2021 07:48 PM

oooong followup but i frankensteined a newer 2002 splashguard into he truck with like half the old stock liner. worked good enough.


All times are GMT. The time now is 07:42 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.