Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (
-   Early Frontier Forum (D22) (
-   -   Pulse wiper (

abunai12 01-19-2018 02:34 AM

Pulse wiper
What parts would i need to change from two speed wiper to pulse wiper????
I have a 1999 EX.
As far as I can see the motor and arms are the same.
I know I'll need a pulse switch and the pulse module.
Is the module called the amplifier????
Is the wire harness different????

86.5KC 01-19-2018 01:54 PM

Hi Abunai,
Here is the information you are looking for.

You will need the wiper stalk and wiring harness as well as the intermittent wiper amplifier and harness, and the ability to follow the attached instructions.
Good luck.

abunai12 01-19-2018 07:53 PM

Thank you
I will gather up the parts and change it.

abunai12 01-23-2018 12:56 AM

My old Axxess is all rusted out. Time to junk it.
Checked the wiper switch and it looks the same.
Gong to take the switch and amplifier out and see if I can get it to work.

abunai12 02-01-2018 08:55 AM

I checked on the Amp and the plug is different.
The 1990 Axxess has a rectangle plug.
The Frontier has a oval plug.
This is what I've found so far. Not sure how accurate it is.
The wiper switch is available aftermarket. OEM #252601E400, 252302B600.
96-97 Infinity I30
95-98 240SX
94-01 Altima
92-94 D21 P/U
98-01 Frontier
94-96 Maxima
96-92 P/U
00-01 Xterra
The amp is factory only as far as I can see. OEM #28510-4S100
00-02 Xterra
99-02 Frontier.
I also found that the amp is strapped to the wiper motor with a plastic zip tie.

abunai12 01-29-2019 02:09 AM

I found a donor truck.
Got the motor, amp and switch.
Works great.

All times are GMT. The time now is 12:43 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.