Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Hardbody Forum (D21) (http://www.infamousnissan.com/forum/forumdisplay.php?f=21)
-   -   Ignition Timing (http://www.infamousnissan.com/forum/showthread.php?t=23004)

jp2code 03-25-2016 05:29 PM

Quote:

Originally Posted by swampyankee (Post 451980)
Just Curious, but how do you do the Timing on an Automatic with the Vehicle in "DRIVE"?
Jack up the rear wheels.

Just put the transmission into Neutral and proceed.

:drink:

swampyankee 03-25-2016 06:26 PM

Quote:

Originally Posted by jp2code (Post 451984)
Just put the transmission into Neutral and proceed.

:drink:

The Reason I asked Joe, was the instruction sheet from your first post requires the vehicle to be in "Drive". There's even a footnote.

jp2code 03-25-2016 07:46 PM

That's going to make it hard to check the timing, then.

I guess you have to have your buddy do the timing while you steer the vehicle.

Otherwise, you'd have to use the emergency brake or wheel chocks.

chrisba 05-02-2016 01:01 PM

I have loosened the two bolts holding the distributor down but can't get it to move any suggestions.

jp2code 05-02-2016 01:06 PM

Quote:

Originally Posted by chrisba (Post 455383)
I have loosened the two bolts holding the distributor down but can't get it to move any suggestions.

That sounds odd. I've never heard of that.

Are you sure you loosened the right bolts?

alabama_lowlife 05-02-2016 01:14 PM

Quote:

Originally Posted by chrisba (Post 455383)
I have loosened the two bolts holding the distributor down but can't get it to move any suggestions.

Could be a little corrosion or something holding it in place. Might try tapping it with a block of wood and a hammer.

chrisba 05-02-2016 02:19 PM

I got it to move with a little gentle persuasion. Thank you

uwantitrightdoityourself 06-16-2018 08:53 PM

my truck is a 97 too, I found timing specs on EC-323, Under: Inspection and adjustment. page-463. I know I saw it somewhere else too but I couldn't find it just now.
Leonard


All times are GMT. The time now is 10:20 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.