|
![]() |
#1 |
Join Date: May 2017
Location: Hawaii
Posts: 35
Vehicle: 1999 Frountier
Thanks: 0
Thanked 1 Time in 1 Post
|
![]()
1999 2wd EX. Extra cab, 4cly, 5 speed.
All stock A few weeks ago, I noticed a slight vibration through the steering wheel and front. Checked the tires, tie rod ends, center link, ball joints, bushings. Everything feels tight when squeezed with the pliers. No movement on the ball joints. Wheel bearings tight. No play. Found one of the tires had a slight flat spot. Thought it could be the start of a broken belt. I replaced the two front tires. Tire ware showed alignment to be good. Now it seemed to have gotten worse. It's not all the time. Over 45mph it's fine. So the balance is good. Going slow straight is good. On a slight turn, it acts like one of the wheels is wobbling. Steering wheel shakes. When straighten out, it goes away. Kind of stumped. Don't want to start just replacing parts. Any suggestions???? |
![]() |
![]() |
![]() |
#2 |
Owner and Administrator
Join Date: Sep 2008
Location: jack, alabama
Age: 41
Posts: 10,275
Vehicle: 2012 370Z, 1970 Datsun 521, 1995 Nissan Hardbody x2
Thanks: 943
Thanked 2,032 Times in 1,671 Posts
|
![]()
Have you taken it to a shop to let them inspect the steering parts? They may find something you’re overlooking and/or considering good.
__________________
|
![]() |
![]() |
![]() |
#3 |
The Post Count Whore
Join Date: May 2014
Location: Sorrento, Florida
Age: 55
Posts: 7,701
Vehicle: 2017 Nissan Frontier Desert Runner
Thanks: 67
Thanked 949 Times in 869 Posts
|
![]()
swap the tires front to rear and see if it goes away, if it does it may be a wheel problem.
__________________
My name is Tony and I'm a Infamousaholic
Current truck - 2017 Nissan Frontier Desert Runner , (formerly owned: 1993 Nissan Hardbody king cab 2wd, 90 Nissan Sentra, 94 Nissan Pathfinder SE 4x4, 05 Nissan Titan, 87 Nissan SE-V6 4x4 king cab, 94 Infiniti Q45t & 80 Datsun 310GX ) |
![]() |
![]() |
![]() |
#4 |
Join Date: May 2017
Location: Hawaii
Posts: 35
Vehicle: 1999 Frountier
Thanks: 0
Thanked 1 Time in 1 Post
|
![]()
I noticed the rear is a little lower than the front.
This would change the caster angle. I'm wonder if this could be the problem????? Anyone know what the caster angle setting is???? |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|