$200 Hardbody - Infamous Nissan

PoodlePuncher · 02-02-2020, 08:49 AM

Last week i picked up a 95 KC for $200
I don't have "BIG PLANS" or ambitions for this, as i was specifically looking for a "beater", but who knows where it will end up.

At this point i'm just looking to get it on the road, and will be uploading Progress videos to my channel on Youtube.

Dragged it out of a field, where it was parked for the last year

Interior is disgusting

Yes, that is snow in the back... bucket frozen to the floor.

PoodlePuncher · 02-02-2020, 08:55 AM

So far, i pulled the seats, and cleaned up the interior as best i could due to the cold weather, but It's supposed to be in the 40's today, which means i actually have a chance to get the garage warmed up enough to finish defrosting the carpet.

Ignition parts finally arrived, so i should know if it will start/run tonight

First video should be posted tomorrow.

PoodlePuncher · 02-02-2020, 04:51 PM

Apparently, if you're not a beekeeper, "you ain't $hit"

dvdswan · 02-03-2020, 03:44 PM

You might want to rip out the interior and make sure your floor isn't rusty. If the carpet is still in good shape you can scrub it and let it dry. Otherwise replace it, it will probably be moldy.

OldGreyBeast · 02-03-2020, 03:48 PM

+1 on checking the floor... I'm currently repairing the floor on the driver's side of my truck. The metal had gotten so thin you could poke through it with your finger.

robson1015 · 02-03-2020, 06:26 PM

Soooooo- What was in the headliner ??????

PoodlePuncher · 02-03-2020, 09:41 PM

Quote:

Originally Posted by robson1015

Soooooo- What was in the headliner ??????

The answer has been revealed

PoodlePuncher · 02-03-2020, 09:45 PM

Quote:

Originally Posted by dvdswan

You might want to rip out the interior and make sure your floor isn't rusty. If the carpet is still in good shape you can scrub it and let it dry. Otherwise replace it, it will probably be moldy.

I crawled underneath the truck when i got it home, and the floor is fine for the most part.

There are some issues with the Rockers, and back corners, but i'll worry about that, once i know it runs & drives.

New carpet is definately on the agenda, and i noticed the drivers side bedside is really floppy, so probably a flat bed too.

PoodlePuncher · 02-05-2020, 08:37 AM

Part 1 has been uploaded to youtube

$200 Hardbody Part 1 - Welcome Home

The Headliner video should be up in another day or so.

robson1015 · 02-05-2020, 01:14 PM

Nice video. Check out fram oil filter review on u-tube, not good. Just a heads up....
You look like an 80s Rocker. I bet you have Def Leppard on cassette there somewhere.lol

02-02-2020, 08:49 AM	#1
PoodlePuncher Join Date: Jan 2020 Location: Minnesota Posts: 149 Vehicle: 95 XE Thanks: 14 Thanked 19 Times in 18 Posts	$200 Hardbody Last week i picked up a 95 KC for $200 I don't have "BIG PLANS" or ambitions for this, as i was specifically looking for a "beater", but who knows where it will end up. At this point i'm just looking to get it on the road, and will be uploading Progress videos to my channel on Youtube. Dragged it out of a field, where it was parked for the last year Interior is disgusting Yes, that is snow in the back... bucket frozen to the floor. __________________ '95 4x4 King Cab XE - '16 Veloster Turbo - '00 Durango YouTube Last edited by PoodlePuncher; 02-02-2020 at 09:26 AM.

02-02-2020, 08:55 AM	#2
PoodlePuncher Join Date: Jan 2020 Location: Minnesota Posts: 149 Vehicle: 95 XE Thanks: 14 Thanked 19 Times in 18 Posts	So far, i pulled the seats, and cleaned up the interior as best i could due to the cold weather, but It's supposed to be in the 40's today, which means i actually have a chance to get the garage warmed up enough to finish defrosting the carpet. Ignition parts finally arrived, so i should know if it will start/run tonight First video should be posted tomorrow. __________________ '95 4x4 King Cab XE - '16 Veloster Turbo - '00 Durango YouTube Last edited by PoodlePuncher; 02-02-2020 at 09:26 AM.

02-02-2020, 04:51 PM	#3
PoodlePuncher Join Date: Jan 2020 Location: Minnesota Posts: 149 Vehicle: 95 XE Thanks: 14 Thanked 19 Times in 18 Posts	Apparently, if you're not a beekeeper, "you ain't $hit" __________________ '95 4x4 King Cab XE - '16 Veloster Turbo - '00 Durango YouTube

02-03-2020, 03:44 PM	#4
dvdswan Super Moderator Join Date: Mar 2009 Location: Port Orchard, WA Posts: 5,163 Vehicle: 96 HB Thanks: 167 Thanked 743 Times in 655 Posts	You might want to rip out the interior and make sure your floor isn't rusty. If the carpet is still in good shape you can scrub it and let it dry. Otherwise replace it, it will probably be moldy. __________________ Dave 96 HB XE SAS'd D44 3-link on 35s http://www.cardomain.com/ride/2618002

02-03-2020, 03:48 PM	#5
OldGreyBeast 1986.5 HB 4x4 3.0V6 Join Date: Mar 2012 Location: North AL Age: 33 Posts: 3,993 Vehicle: 86.5 Nissan D21, 87 Mercedes 190D Turbo, 10 Mercedes E350 AWD, 17 Honda CBR500R, 16 Suzuki GSXS1000 Thanks: 398 Thanked 498 Times in 433 Posts	+1 on checking the floor... I'm currently repairing the floor on the driver's side of my truck. The metal had gotten so thin you could poke through it with your finger. __________________ Build log for the Beast - https://beastbuildlog.blogspot.com - Last Updated 18 OCT 2016 1986.5 FSM GI section - https://imgur.com/gallery/mjT18bV

02-03-2020, 06:26 PM	#6
robson1015 Join Date: Nov 2019 Location: Ohio Age: 61 Posts: 82 Vehicle: 1993 Nissan QMD21 (Japanese fire truck) Thanks: 0 Thanked 13 Times in 13 Posts	Soooooo- What was in the headliner ??????

02-05-2020, 08:37 AM	#9
PoodlePuncher Join Date: Jan 2020 Location: Minnesota Posts: 149 Vehicle: 95 XE Thanks: 14 Thanked 19 Times in 18 Posts	Part 1 has been uploaded to youtube $200 Hardbody Part 1 - Welcome Home The Headliner video should be up in another day or so. __________________ '95 4x4 King Cab XE - '16 Veloster Turbo - '00 Durango YouTube

02-05-2020, 01:14 PM	#10
robson1015 Join Date: Nov 2019 Location: Ohio Age: 61 Posts: 82 Vehicle: 1993 Nissan QMD21 (Japanese fire truck) Thanks: 0 Thanked 13 Times in 13 Posts	Nice video. Check out fram oil filter review on u-tube, not good. Just a heads up.... You look like an 80s Rocker. I bet you have Def Leppard on cassette there somewhere.lol

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode