Pulse wiper - Infamous Nissan

abunai12 · 01-19-2018, 02:34 AM

What parts would i need to change from two speed wiper to pulse wiper????
I have a 1999 EX.
As far as I can see the motor and arms are the same.
I know I'll need a pulse switch and the pulse module.
Is the module called the amplifier????
Is the wire harness different????

86.5KC · 01-19-2018, 01:54 PM

Hi Abunai,
Here is the information you are looking for. http://www.infamousnissan.com/forum/...rmittant+wiper

You will need the wiper stalk and wiring harness as well as the intermittent wiper amplifier and harness, and the ability to follow the attached instructions.
Good luck.

abunai12 · 01-19-2018, 07:53 PM

Thank you
I will gather up the parts and change it.

abunai12 · 01-23-2018, 12:56 AM

My old Axxess is all rusted out. Time to junk it.
Checked the wiper switch and it looks the same.
Gong to take the switch and amplifier out and see if I can get it to work.

abunai12 · 02-01-2018, 08:55 AM

I checked on the Amp and the plug is different.
The 1990 Axxess has a rectangle plug.
The Frontier has a oval plug.
This is what I've found so far. Not sure how accurate it is.
The wiper switch is available aftermarket. OEM #252601E400, 252302B600.
96-97 Infinity I30
95-98 240SX
94-01 Altima
92-94 D21 P/U
98-01 Frontier
94-96 Maxima
96-92 P/U
00-01 Xterra
The amp is factory only as far as I can see. OEM #28510-4S100
00-02 Xterra
99-02 Frontier.
I also found that the amp is strapped to the wiper motor with a plastic zip tie.

abunai12 · 01-29-2019, 02:09 AM

I found a donor truck.
Got the motor, amp and switch.
Works great.

01-19-2018, 02:34 AM	#1
abunai12 Join Date: May 2017 Location: Hawaii Posts: 36 Vehicle: 1999 Frountier Thanks: 0 Thanked 1 Time in 1 Post	Pulse wiper What parts would i need to change from two speed wiper to pulse wiper???? I have a 1999 EX. As far as I can see the motor and arms are the same. I know I'll need a pulse switch and the pulse module. Is the module called the amplifier???? Is the wire harness different????

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-19-2018, 01:54 PM	#2
86.5KC Join Date: Jun 2016 Location: Lehigh Valley PA Posts: 173 Vehicle: Nissan D21 1986.5, King Cab, Z24i, 5speed, 2wd Thanks: 12 Thanked 64 Times in 58 Posts	Hi Abunai, Here is the information you are looking for. http://www.infamousnissan.com/forum/...rmittant+wiper You will need the wiper stalk and wiring harness as well as the intermittent wiper amplifier and harness, and the ability to follow the attached instructions. Good luck.

01-19-2018, 07:53 PM	#3
abunai12 Join Date: May 2017 Location: Hawaii Posts: 36 Vehicle: 1999 Frountier Thanks: 0 Thanked 1 Time in 1 Post	Thank you I will gather up the parts and change it.

01-23-2018, 12:56 AM	#4
abunai12 Join Date: May 2017 Location: Hawaii Posts: 36 Vehicle: 1999 Frountier Thanks: 0 Thanked 1 Time in 1 Post	My old Axxess is all rusted out. Time to junk it. Checked the wiper switch and it looks the same. Gong to take the switch and amplifier out and see if I can get it to work.

02-01-2018, 08:55 AM	#5
abunai12 Join Date: May 2017 Location: Hawaii Posts: 36 Vehicle: 1999 Frountier Thanks: 0 Thanked 1 Time in 1 Post	I checked on the Amp and the plug is different. The 1990 Axxess has a rectangle plug. The Frontier has a oval plug. This is what I've found so far. Not sure how accurate it is. The wiper switch is available aftermarket. OEM #252601E400, 252302B600. 96-97 Infinity I30 95-98 240SX 94-01 Altima 92-94 D21 P/U 98-01 Frontier 94-96 Maxima 96-92 P/U 00-01 Xterra The amp is factory only as far as I can see. OEM #28510-4S100 00-02 Xterra 99-02 Frontier. I also found that the amp is strapped to the wiper motor with a plastic zip tie.

01-29-2019, 02:09 AM	#6
abunai12 Join Date: May 2017 Location: Hawaii Posts: 36 Vehicle: 1999 Frountier Thanks: 0 Thanked 1 Time in 1 Post	I found a donor truck. Got the motor, amp and switch. Works great.