Quote:
Originally Posted by street_rulerr
also does the hardware screw into you bed or clamp on?
|
mine uses 6 aluminum camper shell clamps, a bolt with a 14mm head to tighten. it came with 4, i had 2 extras. 4 is plenty.
i used this between the frame and bed to seal around all 3 sides.
https://www.homedepot.com/p/Frost-Ki...449H/100210956
it's also available at Lowes.
a little rain crept in before i used it. adhesive is on 1 side (bed side) in case i need to remove the cover and haul something tall.
original 2 sided tape seal tore when i removed it from donor truck.