Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Project Build Log (http://www.infamousnissan.com/forum/forumdisplay.php?f=34)
-   -   My 1990 Hardbody Project (http://www.infamousnissan.com/forum/showthread.php?t=26523)

MrBoomPow 04-24-2013 03:57 AM

My 1990 Hardbody Project
 
I Paid $500 for this 1990 Hardbody. Needs some work. But goin to post progress here.

https://sphotos-b.xx.fbcdn.net/hphot...13263350_n.jpg

MrBoomPow 04-24-2013 03:58 AM

-few motor issues got to work.
-light problems
-getting a new bed for it
-lowering it

scoobysmak 04-24-2013 08:55 AM

For $500 and it runs you got a pretty good deal (even if it needs some motor work).

MrBoomPow 04-24-2013 11:52 AM

yeah and i can drive it and stuff. jus sputters out when you give to much throttle

jp2code 04-24-2013 07:18 PM

Sounds like you need to pull the codes to see what area is messing up.

MrBoomPow 05-15-2013 04:12 AM

ill post pictures tomorrow. got a new set of wheels. and new fuel pump and got light issues fixed.
Next step taking the shitty flatbed off and lowering it

harper 05-15-2013 04:58 AM

Nice thread jack on timothys thread lol, crank torsions to lower front, and angled lowering blocks for the rear.

MrBoomPow 05-15-2013 05:07 AM

How many inches you think I should go?? I want as low as possible but what's actually possible ?

MrBoomPow 05-15-2013 05:08 AM

Quote:

Originally Posted by harper (Post 339523)
Nice thread jack on timothys thread lol, crank torsions to lower front, and angled lowering blocks for the rear.




How many inches you think I should go?? I want as low as possible but what's actually possible ?

harper 05-15-2013 05:10 AM

Depends on how much space you have between the fender and tire. For the front remove the bumpstops, or replace with low profile bumpstops, and see how far down you can go. For the rear you can get either 3 or 4 inch angled blocks, and if that's not low enough do the hangar redrill, there's a how to somewhere on the forum.

As far as how low you can go, there's no limit really, you can be slammed so much that you can't clear speed bumps, just depends on how low you want to go. My frontier is about 3" down all around.


All times are GMT. The time now is 11:09 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.